Hydro-Logic® Evolution RO1000™ - 1000 GPD

Hydro-Logic® Evolution RO1000™ – 1000 GPD Reverse Osmosis System

High-performance, commercial-grade water purification.

The Evolution RO1000™ produces up to 1,000 gallons per day (GPD) of ultra-pure water—more than 42 gallons per hour—and up to 1,500 GPD with the optional booster pump. This powerful RO system removes 94%+ of total dissolved solids (TDS) and is ideal for serious growers who demand clean, consistent water quality.

Key Benefits:

• Efficient water use – Comes standard with a 2:1 waste-to-product water ratio. Switch to a 1:1 ratio with the included orange flow restrictor to reduce waste (recommended below 300 ppm TDS).

• Advanced filtration – Custom KDF/catalytic carbon filter removes chlorine, chloramine, iron, sulfur, and heavy metals.

• Easy to install – Quick setup with color-coded fittings and tubing.

• Built to last – Durable components and long-lasting membranes with minimal maintenance.

For maximum membrane life and lower maintenance, pair it with the Hydro-Logic PreEvolution Pre-Filter (SKU: HGC728792). It’s reusable, high-capacity, and a must-have if you're using over 150 gallons per week.

What’s Included:

• (1) Manifold

• (3) Filter Housings

• (1) Carbon Filter

• (2) 600+ GPD Membranes

• (1) White Feed Fitting

• (1) Blue Product Water Fitting

• (1) Orange 1:1 Drain Fitting

• (1) Green 2:1 Drain Fitting

• (1) Lock Bar

• (1) Pressure Gauge with Tee

• (1) Support Leg / Housing Wrench

• Tubing: White (6'), Black (10'), Blue (10')

• (1) Garden Hose Connector

• (1) In-line Shut-Off Valve

Performance & Compatibility

TFC Membrane Rejection Rates (Examples):

• Calcium: 95–98%

• Chloride: 92–98%

• Fluoride: 93–95%

• Iron: 96–98%

• Lead: 95–98%

• Nitrate: 90–95%

• Sodium: 92–98%
  (Full chart available in downloadable resources.)

Operating Range:

• Pressure: 40–80 PSI

• Temp: 40°F–100°F

• TDS: 50–2,000 mg/L

• pH: 4–10

• Iron: ≤ 0.1 mg/L

• Chlorine: ≤ 1.0 mg/L

• Turbidity: ≤ 1 NTU

Choosing Between 2:1 and 1:1 Drain Ratios

• Use the Green 2:1 fitting for longer membrane life.

• Use the Orange 1:1 fitting to conserve water if your source water is ≤ 300 ppm TDS.
  Higher TDS with the 1:1 fitting may reduce membrane lifespan.